All CategoriesMultilayer Ceramic Capacitor --MLCC
-
Release Date: 2021-07-06 Browse Times: 701
-
Content
Multilayer Ceramic Capacitor (MLCC) works as a 'dam' that temporarily charges and discharges electricity. It regulates the current's flow in a circuit and prevent electromagnetic interference between components.Because thickness of single dielectric and number of stacked layers are related with capacity of electricity, technology for thinning single layer and stacking more layers is important.
Normal
A general MLCC temporarily charges and remove noise in electronic circuits, and is the most broadly available chip type of capacitor. The product line allows for realization of various sizes and a wide range of capacitance. It also has the structural capacity to mount chips on a PCB at a high speed.
Embedded/LSC
This can be mounted between the solder balls to deal with thin devices or modules. It can reduce the thickness of the module or be embedded inside the board to secure the mounting area. It can supply current quickly in a stable manner to high-speed AP of mobile devices. In addition it helps remove high-frequency noise, suffering less from external environmental stress.
High Bending Strength
High Bending Strength(General)
The thermal/mechanical stress on the chip can be reduced by the ductile properties of Soft Termination. It is also resistant to stress caused by board bending.
High Bending Strength(Automotive)
This product applies stress-management technology against external deformation so as to prevent MLCC defects from taking place when mechanical/thermal deformation of PCB occurs. With greater durability than existing products, it can be used in applications requiring safety.
ESD Protection
Specialized for use in protecting circuits from ESD, this component guarantees a higher level of ESD than typical MLCC products. It meets the IEC 61000-4-2 standard.
Fail Safe(Soft Termination 5mm)
Designed to prevent circuit malfunction in the case of an internal shunt caused by a crack occurs in an MLCC product. This also guarantees 5mm bending and prevents defects caused by PCB deformation. This product has the highest degree of safety among all MLCCs.
Low Acoustic Noise
MLCC tremors can occur due to piezoelectric phenomena in electronic devices. These tremors are transmitted to the substrate, causing the substrate to tremble, producing audible noise (20Hz~20kHz). Low Acoustic Noise products are a solution that can effectively reduce this noise.
Low ESL
MLCCs with low equivalent series inductance (ESL) can be used in circuits with limited mounting area, as a small quantity of such MLCCs can sufficiently replace high-speed IC MLCCs.
Array
As various electronic products such as portable devices have gotten smaller, several chips have been unified in order to secure mounting space. This reduces the cost of mounting and the ripple voltage.
About US
MY GROUP (ASIA) LIMITED , established in 1988, specializes in electronic components distribution of world-known brands. Our company deals with original distribution as well as provides solutions for electronic components supply chain through cost reduction, including long-term stock of passive components, 3day speedy delivery of shortage components, stock consignment, BOM and supply in small quantity.
Some Agency Brand ：
